Waste Can Compactor CE

Wast Can/Metal Compacor 1. CE Quality 2. Auto 3.Hydraulic 4.30-50 bales/hour

1Function and Advanctages::

1)Function    This machine can press any of the waste metal materials with thickness less than 3mm such as Metal scraps,waste cans etc.this is the best choice machine for steel recycling enterprise!

2)Advantages:    a)Use Hydraulic rotation, smart deign ,impact structure and  good seal features.

          b)Large Feeding Cabin, High working efficiency.

c)Stable Running, Energy saving,Easy operations.

          d)Horizontal Bale Pressing out Safety and reliable, Beautiful finished Briquette size

A: General Stucture:

Consists of Main Machine Frame, Hydraulic System and Electric System

I):Main Machine consists of Main Frame, Door Cover,Covery Cylinder,Main Cylinder and Main Press Head, Side Cylinder and Side Press head.Bale tilting cylinder etc

1              Main frame consists of Bottom, Side Plate,Covering Plate,Main Cylinder Support, Side Cylinder Support etc.The Feeding cabin with bottom , side plate,Door cover, Main Press Head, Side Press head.All are fitted with Anti-abraising liner plate.(not including Door cover)

2           Door Cover and Cover Cylinder: Door cover was hinged with the Axis Guide on the side plate. Cover Cylinder was hinged to the Girder of support also.The door covery with Slide is joint to the Piston Rod of the  Covering Cylinder,The cover cylinder will drive the Door cover to open and close automatically

3           Side Cylinder and Side Press Head: Side Cylinder is under the cover cylinder support,The side press head is joint with the Side cylinder piston rod ,Under the running of the cylinder, fulfill the Briquete compact, pushing out and returning

4             Main Cylinder and Main Press Head: Main Cylinder is fitted at the operating side, welded on the out stand ,Main press head is joint to the piston rod of main cylinder. Under the running of the main cylinder,finish the Briquette compacting, pushing and returning 

5              Main Cylinder ,Side Cylinder, Cover Cylinder and Tilting Cylinder  are all single piston with dural force cylinders.All the pistons are with seal , which make the fore and aft space . When high pressure to the fore space, the piston run forward

II)                                 Hydraulic System: Consisit of Motor pump station, valve station,oil tank and pipes ect

III)                              Electric System: mainly is the electric motor starting stystems

B: Main Technical Data:

No	Descriptions	Unit	Specifications
			Main Cylinder	Cover Cylinder	Side Cylinder	Door Cylinder
1	Nominal Push Force	KN	1600	500	1200	285
2	Cylinder Inner Diameter	mm	φ280	φ160	φ250	φ125
3	Piston Diamter	mm	φ200	φ100	φ180	φ70
4	Stroke	mm	1300	1420	1255	465
5	Max Press Force	Mpa	25	25	25	16
6	Density of Briquette	2.0t/m3
7	Motor	1set	22kw-6p
8	Oil pump	1set	160YCY14-1B
9	Single Cycle	S	90(empty run)
10	Feed Cabin Size	mm	1600×1000×800
11	Briquette Size	mm	400×400×400~600
12	Machine Weight	T	About 10
13	Discharge Type		Side Push
14	Operating		Manual
15	Output		About 30 Bales/ hour
16	Machine Size	mm	4150×3500×2600

Waste Can Compactor CE